Tungsten, molybdenum and heatspreader materials

Processed products, etc.

Molybdenum products

Molybdenum sheets / plates
●Product selection guide

◎Most suitable  ○Suitable  △Unsuitable

Application Type High-temperature
deformation
resistance
Shock
resistance
Bending
ability
Drawing
ability
Cutting
ability
MOP Heatspreaders, boats for evaporation,
electron tubes, furnace pars, crucibles
Standard
products
Deep drawing materials,
boats for evaporation
Cross-rolled
products
TEM Reflectors Standard
products
DMB Reflectors, Sintering plates, Boat Honed surface
Coated surface
TEM-B
TEM Acid-cleaned
and mirror finish
MOP
MOP is the most common pure molybdenum sheet/plate. It features a high melting point, high strength at high temperatures, high thermal conductivity, low coefficient of thermal expansion and excellent machinability.
TEM
Molybdenum sheet/plate that has considerably solved the weak points of conventional molybdenum such as recrystallization brittleness and creep (deformation) resistance at high temperatures.
TEM-B
TEM-B excels in high-temperature deformation resistance and shock resistance at room temperature and also allows plastic working at room temperature. It also features higher high-temperature strength than pure molybdenum.
DMB
DMB features excellent creep (deformation) resistance at high temperatures, a low coefficient of thermal expansion and excellent characteristics in vacuum or reduction atmosphere.
●Standard specifications of molybdenum sheets / plates
Thickness
General tolerance±10%
(mm)
Material Finished surface Dimensions
MOP TEM Mirror Chemically cleaned Max. width Max. length
0.015~0.099     110 500
0.10~0.15     300 1000
0.16~0.19   300 1500
0.20~2.9 600 2000
3.0~25.0   600 1000

※The tolerances in the above table may vary depending on finishing.Please contact us if you
require different specifications.

Thickness
General tolerance±10%
(mm)
Material Finished surface Dimensions
DMB TEM-B Mirror Chemically cleaned Sand blasted Max. width Max. length
0.50~1.4   300 600
1.5~2.9 500 600
3.0~6.9   600 600
7.0~14.9     600 600

※The tolerances in the above table may vary depending on finishing.Please contact us if you require different specifications.

●Standard specifications of cross-rolled molybdenum sheets / plates
Thickness
General tolerance±10%
(mm)
Material Finished surface Dimensions
MOP Mirror Max. width Max. length
0.10~1.00 300 1000
●High-temperature deformation resistance of various kinds of molybdenum sheets / plates
High-temperature deformation resistance of various kinds of molybdenum sheets & plates
●High-temperature strength of various kinds of molybdenum sheets / plates after use at high temperature (1800℃)
High-temperature strength of various kinds of molybdenum sheets & plates after use at high temperature (1800℃)

Inquiry by email